language
HARBIN HENGWEI TECHNOLOGY CO.,LTD
Here's what we've got for you. Hope it helps.
Frequently Asked Question
What are the standards for purchasing an electric surgical bed
At present, electric surgical tables are a common operating table in applications. Compared with ordinary operating tables, this type of table can achieve different position changes through control structures. Ordinary ones only need to meet the operational requirements of the surgical process, which is also very important for normal operation. When we use an electric surgical table, we need to first turn on the switch, and then when the motor rotates, we operate the longitudinal rod of the surgical table connected to the distributor. This way, we can control the surgical table with two oil cylinders, and then turn from upright to moderate, and then descend to a certain position.
Harbin Electric Surgical Bed Company reminds you that the surgical bed is a comprehensive equipment. For comprehensive electric surgical beds, the main inspection areas generally include the joint points between various plates, as well as the hydraulic device of the equipment, which is still very important. How to choose a comprehensive electric surgical bed? Purchase criteria for electric surgical beds:
1. The specification is 2200900500mm, and the bed surface is stamped once with 1.2mm thick cold-rolled steel plate, without any surface welding points.
Harbin Electric Surgical Bed
When purchasing, one should choose to configure a safe voltage linear motor. The performance is relatively stable, with a battery that can work for 4 hours even in the event of a power outage.
3. The head and tail of the bed should be shaped with high-quality materials, and the switch should be installed externally, making it easy to unload. The head card can also be inserted.
When the operation is completed, the operating table rises from a relatively high position to a relatively high level, and then the operating table becomes upright. Due to the high level of use of the operating table, some may even require multiple uses per day, so it is necessary to maintain a high level of cleanliness on the operating table in daily life. After our operation is completed, we need to cut off the power, stop cleaning the outside of the operating table, check all work, and then power on the operating table to ensure stable application.
What safety measures are required for medical shadowless lamps
The safety measures required for Harbin medical shadowless lamps include the following aspects:
Electrical safety: Shadowless lamps must take a series of measures to ensure electrical safety. Firstly, it is necessary to carefully handle hardware design and internal reset procedures to prevent circuit failures. Secondly, it is necessary to eliminate erroneous interference signals, so the entire system should adopt complete electrical isolation to prevent the mutual influence of various parts of the circuit. In addition, to prevent the impact of power grid and damage on the system, overvoltage and overcurrent automatic protection circuits should be used. When the voltage or current exceeds 20% of the set value, the system will automatically cut off the power supply to ensure the safety of the system circuit and high brightness LED.
Heat management: Shadowless lamps may generate excessive heat during operation, which may affect the surgical process. Therefore, measures must be taken to prevent heat accumulation, such as using open structures to dissipate heat or using fans to promote airflow. Some sealed LED surgical shadowless lamps also adopt special designs to promote heat conduction and flow heat to surfaces that can accept heat without affecting the operation of the shadowless lamp.
Mechanical safety: The mechanical safety of shadowless lamps includes material selection, structural design, manufacturing processes, and maintenance. When medical workers use shadowless lamps, they should check for foreign objects inside the lamp, whether the lamp body is loose, etc., to ensure the mechanical safety of the lamp during use.
Radiation safety: The radiation level generated by shadowless lamps must comply with national and industry standards. Medical workers should pay attention to maintaining an appropriate distance when using shadowless lamps and avoid prolonged exposure to radiation.
Other safety standards: During use, shadowless lamps should be kept dry and clean to prevent corrosive substances such as water, oil, and corrosive liquids from seeping into the interior of the lamp. Shadowless lamps should be installed on sturdy brackets or hangers to prevent damage or falling. After use, the power should be turned off and disconnected in a timely manner.
These safety measures collectively ensure the stability and safety of medical shadowless lamps during the surgical process, providing illumination for healthcare workers while ensuring patient safety.
Contact us
ADD：No.8 New Xiangfang Vi11age Developing Zone, Xingfu Town, Xiangfang District, Harbin.
Wechat：0086-15046651854
